光伏保險絲認證怎么樣辦理?
光伏保險絲UL認證基本要求---基本結構
UL 248-1;CSA C22.2 NO. 248.1
UL 248-19;CSA C22.2 NO. 248.19
CCN:JFGA/7
光伏保險絲UL認證基本要求--- Marking(標記)
4.1 Fuses shall be marked as indicated in the Standard for Low-Voltage Fuses - Part 1: General Requirements, CSA C22.2 No. 248-1 / UL 248-1, with additional requirements provided as follows:
a) The fuse shall be marked, with the letters “PV” or “gPV”; or
b) The text, “Photovoltaic Fuse”.
在保險絲要打上“PV”,“gPV”;或“Photovoltaic Fuse”
4.2 Fuses with integral wiring terminations shall also be marked in accordance with the Standard for Wire Connectors, UL 486A-486B / CSA C22.2 No. 65. The marking may be on the fuse, the smallest unit container, or an information sheet.
保險絲如果配有接線端子,要按照接線端子相關標準的要求打marking(在保險絲上或小包裝上)
光伏保險絲UL認證基本要求--- 使用限制
These types of fuses are not intended to protect downstream inverter components, such as capacitors and against the discharge of such capacitors back into the arrays.
不能用于保護光伏逆變器里面的部件例如電容,也不能用來防止這類電容的反灌
The voltage rating may be up to 1500 Vdc
額定電壓<= 1500 V dc
不能打上“Current Limiting”的Marking
光伏保險絲UL認證辦理流程
1、項目確定:確認試驗所依據的UL標準、認證費用與時間、樣品數量等
2、資料準備:根據UL的要求,企業準備好認證所需的各項資料或文件;
3、送樣測試:企業將樣品寄送至指定的實驗室進行產品測試;
4、簽發報告:產品檢測結果符合UL標準要求,正式簽發檢測報告;
5、工廠審核:UL將對生產工廠進行次工廠檢查,以確保符合標準要求;
6、標志使用:審核符合要求后,申請人正式獲得授權使用UL標志?!疽陨蟽热萦?strong>溫度開關為你整理發布】
- 上一條:UL758電線電纜UL認證如何辦理
- 下一條:連接器接插件機械沖擊試驗相關介紹